CE308 Epoxy Anchoring Gel is a two-component, 100% solids, moisture-insensitive, high strength, high modulus, multi-purpose epoxy gel adhesive. It meets the current ASTM C881 and AASHTO M235 Types I, II, IV & V Grade 3, Class B & C specifications.
High strength, high modulus epoxy binder
Non-sag gel consistency
Convenient 1:1 mix ratio by volume
Where To Use
Inserts into existing concrete
Surface must be clean and sound. Surface must be free of standing water. Remove curing compounds, laitance, grease, asphalt, rubber and any foreign matter or unsound surface.
250 ml uni-cartridge
600 ml side-by-side cartridge
1500 ml side-by-side cartridge
1 gal / 3.8 L units
2 gal / 7.6 L units
10 gal / 37.9 L units
2 years in original unopened containers
Store at 40F-95F (5C-35C)
Application Temperature Range
Condition material to 65⁰F – 85⁰F (18⁰C – 29⁰C) before using.