CONTACT PHONE 816-380-4747

Mon - Fri 8:00AM - 5:00PM Central


1150 SE Hamblen Rd, Lee's Summit, MO 64081

FasTrac CE330 Epoxy Binder

Low Modulus Epoxy Polymer Binder

FasTrac CE330 Epoxy Binder is a two-component, 100% solids, moisture-tolerant, high strength, low modulus, multi-purpose epoxy adhesive.  It meets ASTM C881 and AASHTO M235, Type III, Classes B & C specificiations.

Use as a binder for High Friction Surface Treatment (HFST) on portland cement concrete, asphalt pavements and other approved substrates.  CE330 is also used for bonding thin overlays on bridge and parking decks, as well as for bike and bus lane demarcation with colored aggregate.

Crews installing the surface treatment.
Applying the FasTrac CE330
Applying the FasTrac CE330
Applying the FasTrac CE330
FasTrac CE330 provides a perfect finish.
Applying the FasTrac CE330
Before / After


  • High strength, low modulus epoxy binder
  • Rapid cure return to traffic formula
  • Technical support from experienced technicians
  • Independent testing lab certification
  • Convenient 1:1 mix ratio by volume
  • Protects concrete from water and deicing salts

Where To Use

  • Airport runways
  • Portland cement concrete
  • asphalt pavements
  • Parking decks
  • Bridge decks
  • Bike and bus lane demarcation


Surface must be must be clean and sound. Surface should be visibly dry. No standing water. Concrete moisture levels must be less than 5 %


600 ml cartridge

2 gal / 7.6 L unit

10 gal / 38 L unit

500 gal / 1,893 L unit

Shelf Life

2 years in original unopened containers


Store at 40F-95F (5C-35C)

Application Temperature Range

Condition material to 65°F – 85°F ( 18-29°C) for optimum application. Minimum age of concrete 21- 28 days, depending on mix design.* Minimum age of asphalt is 30 days and 75 % aggregate exposure.*