FasTrac CE450 Novolac Coating is a two-component, 100% solids, highly chemical resistant epoxy coating for horizontal and vertical applications effective on both steel and concrete. It’s designed for applications where exposure to solvent, strong acids and alkalis, and other aggressive and corrosive chemicals.

PACKAGING AND YIELD

FasTrac CE450 Novolac Coating is a two-component system consisting of premeasured containers of resin and hardener. It is available as a 3 gallon (11.4 liter) unit yielding coverage of approximately 320 sq. ft. @ 15 mils (29.7 sq. m. @ 380 microns), 240 sq. ft. @ 20 mils (22.3 sq. m. @ 510 microns), 192 sq. ft. @ 25 mils (17.8 sq. m. @ 635 microns).
Appearance: Component A—clear or grey, Component B—clear Shelf Life: 2 years in original unopened container Storage Conditions: 40⁰F-95⁰F (5⁰C-35⁰C) Conditioning: 65⁰F-85⁰F (18⁰C-29⁰C)

MIXING

For optimum performance, all components should be conditioned to between 65°F and 85°F (18°C and 29°C). Premix both Component A (resin) and Component B (hardener) thoroughly before mixing. Place all of Component A and Component B into a suitable container. Component A and Component B are mixed in a 2:1 ratio by volume. Mix Component A and Component B with a slow speed mixer for no more than 3 minutes. Avoid air entrapment. Place mixed material immediately. Mix only that amount of material that can be placed within 35 minutes.

Mix only until all aggregate is wetted out. DO NOT OVER MIX.