CE550 Segmental Bridge Adhesive (SBA) is a solvent free, two-component, high modulus, moisture-insensitive epoxy adhesive designed to bond and seal segmental precast elements. It conforms to the current ASTM C 881, Type VI and VII requirements. It is available in three application temperature ranges, LT (low temperature), MT (medium temperature), and HT (high temperature).
Insensitive to moisture during application, curing, and in service
Three formulations accommodate wide temperature range installations
High strength, high modulus
Non-sag consistency allows vertical and overhead installation
Lubricates surfaces for easy location & positioning of shear keys
Where To Use
Bonding and sealing segmental precast elements with internal tendons
Span-by- span erection when temporary post tensioning is applied
Repair mortar for concrete patching and structure repair
At a film thickness of 1/16” (1.6 mm) the yield is 26 sq. ft. / gal. (2.4 sq. m. / L).Coverage rate is approximate and depends on porosity and profile of concrete.
Factory proportioned 3 gallon unit.
2 years in original unopened containers
Store at 40F-95F (5C-35C)
Application Temperature Range
Condition material to 70°F – 75°F (21°C – 24°C) before using.