FasTrac CE308 STANDARD SET EPOXY ANCHORING GEL
High Strength Epoxy Adhesive
CE308 Epoxy Anchoring Gel is a two-component, 100% solids, moisture-insensitive, high strength, high modulus, multi-purpose epoxy gel adhesive. It meets the current ASTM C881 and AASHTO M235 Types I, II, IV & V Grade 3, Class B & C specifications.
Features
- High strength, high modulus epoxy binder
- Non-sag gel consistency
- Easy dispensing
- Moisture Tolerant
- Convenient 1:1 mix ratio by volume
- Solvent Free
Where To Use
- Reinforcing Steel
- Dowels
- Threaded Rods
- Bolts
- Inserts into existing concrete
- Sealing Cracks
Prep
Surface must be clean and sound. Surface must be free of standing water. Remove curing compounds, laitance, grease, asphalt, rubber and any foreign matter or unsound surface.
Packaging
250 ml uni-cartridge
600 ml side-by-side cartridge
1500 ml side-by-side cartridge
1 gal / 3.8 L units
2 gal / 7.6 L units
10 gal / 37.9 L units
Shelf Life
2 years in original unopened containers
Storage
Store at 40F-95F (5C-35C)
Application Temperature Range
Condition material to 65⁰F – 85⁰F (18⁰C – 29⁰C) before using.