FasTrac ReSurfacer is a two-component, rapid setting, low shrinkage mortar that is used to overlay existing pavements and floors. FasTrac ReSurfacer is mixed with polymer and water on site, and is placed with suitable placement equipment and finished to the desired texture. For applications thicker than 1-inch, the mortar should be extended with 3/8-inch aggregate.
CONTACT PHONE 816-380-4747
OPEN HOURS
Mon - Fri 8:00AM - 5:00PM Central
ADDRESS
1150 SE Hamblen Rd, Lee's Summit, MO 64081
Features
- Rapid Setting; Structures can be opened for pedestrian traffic in less than 1 hour, vehicular traffic in less than 3 hours
- Very low shrinkage
- Low permeability and improved overall durability
- Excellent resistance to freeze/thaw
- Excellent workability
Where To Use
- Resurfacing of floors and pavements
- Adding traction to polished surfaces
- Microtoppings/Thin bonded overlays
- Airport runways
- Bridge deck surfaces
- Industrial concrete floor repair
Yield
1/8 – in ~40 Sq. ft.
1/4 – in ~20 Sq. ft.
1/2 – in ~10 Sq. ft.
Packaging
60 lb bag
2,000 lb bulk bag
Shelf Life
12 mos. properly stored
Storage
Store in a dry and clean area
Application Temperature Range
40° F to 90° F (Hot weather placement procedures recommended above 90° F; Cold weather placement procedures recommended below 50° F)
