HP Grout is a hydraulic-cement based, precision, non-shrink, load-bearing grout having an extended working time up to 30 minutes under fluid condition. HP Grout is designed to transfer load effectively and safely, ensuring long service time of the grouted item. It is a non-corrosive, non-metallic, mineral-based precision grout, developed to have a high intial and ultimate flexural and compressive strength. It can be mixed quickly, as needed, on the jobsite. HP Grout offers exceptional workability and is easily placed by pouring or pumping. The product is designed to give non-shrink performance under various conditions for both interior and exterior applications.
CONTACT PHONE 816-380-4747
OPEN HOURS
Mon - Fri 8:00AM - 5:00PM Central
ADDRESS
1150 SE Hamblen Rd, Lee's Summit, MO 64081
Features
- May be mixed to plastic, flowable and fluid consistencies for easy application.
- Very high compressive and flexural strengths
- High modulus to ensure proper load transfer
- Non-shrink ensures proper load transfer
- Quickly and easily placed by pouring or pumping
- Resists heat up to 600°F (315°C)
- Resists many chemicals, including oils, petroleum products, solvents and mild caustic alkalis
- May be extended up to 50%
- No added chloride or gypsum
- Outstanding flow characteristics; maintains flow for up to 30 minutes at fluid consistency
Where To Use
- Machinery and equipment base plates, windmill turbines, generators, rolling mills, compressors
- Soleplates, bridge seats, precast columns
- Beams, steel column pads, precast beams
- Anchoring guardrails, sign posts, anchor bolts, guide wires, dowels
Yield
Approx. 0.44 ft. ³/bag at high flow
Packaging
50 lb bag
Shelf Life
12 mos. properly stored
Storage
Store in unopened container in a dry and cool area.
Application Temperature Range
40° F to 90° F (Hot weather placement procedures recommended above 90° F; Cold weather placement procedures recommended below 50° F)
