CE820 GRAY EPOXY CHOCK is a two-component epoxy chock for setting critical process machinery and equipment. CE 820 Gray provides excellent tensile and compressive strength properties and is designed to ensure and maintain long-term critical alignment of equipment. As a two-component system, CE820 Gray is easy to use, mix, and place into chock and similar type installations. A highly versatile material, CE820 Gray may be used for chocking, anchoring, and high-load applications.
CONTACT PHONE 816-380-4747
OPEN HOURS
Mon - Fri 8:00AM - 5:00PM Central
ADDRESS
1150 SE Hamblen Rd, Lee's Summit, MO 64081
FasTrac CE820 GRAY EPOXY CHOCK
EPOXY RESIN MACHINE CHOCK
APPLICATIONS
- Compressors
- Pumps
- Steel to Steel Chocking
- Applications subject to high loads
- Anchor / dowel grouting
FEATURES
- High ultimate compressive strengths
- Excellent bond strengths to steel, concrete
- Excellent effective bearing area
- Highly pourable
- Soap and water clean up
Limitations
Typical grouting depth is half inch to 2 inches. For pour depths greater than 2 inches contact CCM technical support regarding the use of Aggregate Extender.
Packaging
0.10 Cubic Foot Unit (.00283 m3) – Part A and Part B premeasured containers
0.50 Cubic Foot Unit (.0141 m3) – Part A and Part B premeasured containers
Shelf Life
2 years in original unopened containers
Storage
Store at 40F-95F (5C-35C)
Application Temperature Range
Condition material to 65⁰F – 95⁰F (18⁰C – 35⁰C) before using.