FasTrac Fast Plug
Hydraulic Water Stop Cement
FasTrac Fast Plug is a one-component, proprietary blend of cementitious materials and performance enhancing chemical additives. This rapid-setting, hydraulic repair mortar is designed to instantly stop running water or seepage in concrete or masonry structures. FasTrac Fast Plug is a high strength mortar that permanently plugs non-moving joints and voids.
Features
- Very rapid setting
- Stop running fluid immediately
- Easy to use / below grade and under water
- Highly versatile
- Non-corrosive, non-metalic
- Expands as it sets
- Sulfate resistant
- Freeze / thaw resistant
Where To Use
- Basement / retaining walls
- Swimming pools
- Voids around pipes
- Wall tie holes
- Sewers / septic tanks
- Tunnels
- Non-potable concrete water tanks
Yield
Approx. 0.50cu.ft./50lb pail when used with recommended water
Packaging
50 lb pail
Shelf Life
12 mos. properly stored
Storage
Store in a dry and clean area
Application Temperature Range
40° F to 90° F (Hot weather placement procedures recommended above 90° F; Cold weather placement procedures recommended below 50° F)