FasTrac CS309 WB
Water-Based Concrete Cure and Seal
FasTrac CS309 WB is a water based, modified acrylic compound for sealing, curing and dustproofing freshly placed concrete. FasTrac CS309 WB effectively seals concrete substrates and provides added resistance to freeze thaw, chloride ion penetration and drying shrinkage. FasTrac CS309 WB s easily applied, VOC compliant and meets the requirements of ASTM C309, Type I, Class A/B and AASHTO M148, Type I, Class A/B.
Features
- Meets ASTM C309 Type I
- Improved Concrete Durability
- Dust Proofs Concrete
- VOC Compliant
Where To Use
- Bridge Decks and Roads
- Parking Garages
- Warehouse Floors
- Columns and Beams
Coverage
200 to 400 square feet per gallon
Packaging
1 gal / 3.8 L units
5 gal / 18.8 L units
55 gal / 208 L units
Shelf Life
18 months in original unopened containers
Storage
Store at 40°F to 95°F (4.4°C to 35°C)
Application Temperature Range
Condition material to 65⁰F – 85⁰F (18⁰C – 29⁰C) before using.
NEW CONCRETE: Apply FasTrac CS309 WB via low pressure sprayer after concrete bleed water has disappeared. Apply uniformly over all surfaces. Avoid puddling. A visible wet sheen should be observed after application. Do not puddle.
OLD CONCRETE: Surfaces must be clean and sound. Remove all curing compounds, paints, markings and loose concrete. Pressure washing of surfaces is recommended. Apply via low pressure sprayer uniformly across all surfaces until a uniform sheen is observed. Do not puddle.