FasTrac CE830 Novolac Epoxy Grout

CE830 Novolac® Epoxy Grout is ideal for applications where exposure to harsh chemicals and solvents is likely:

• Chemical and pharmaceutical facilities: CE830 Novolac® Epoxy Grout is commonly used in chemical and pharmaceutical facilities because of its resistance to a wide range of chemicals and solvents. It can withstand exposure to acids, alkalis, and organic solvents, making it an ideal choice for these types of environments.

• Food and beverage processing: CE830 Novolac® Epoxy Grout is also commonly used in food and beverage processing facilities because it is resistant to food acids, oils, and fats. This makes it an ideal choice for commercial kitchens, food processing plants, and beverage manufacturing facilities.

• Industrial plants: CE830 Novolac® Epoxy Grout is often used in industrial plants because of its resistance to chemicals, solvents, and abrasion. It is commonly used in areas where heavy machinery is present, such as manufacturing plants and factories.

• Medical facilities: CE830 Novolac® Epoxy Grout is also used in medical facilities because it is resistant to a wide range of chemicals, including disinfectants and cleaning agents. It is commonly used in areas where sterilization is critical, such as operating rooms, laboratories, and pharmaceutical manufacturing facilities.

• Swimming pools and other water features: CE830 Novolac® Epoxy Grout is commonly used in swimming pools and other water features because it is resistant to water and chemicals commonly found in pool water, such as chlorine and other sanitizers.

Overall, CE830 Novolac® Epoxy Grout is a versatile material that is ideal for a wide range of applications where resistance to harsh chemicals, solvents, and abrasion is required.

PACKAGING AND YIELD

FasTracEpoxy Novolac Coating is a two-component system consisting of premeasured containers of resin and hardener. It is available as a 3.9 gallon (14.7 liter) unit yielding coverage of approximately 415 sq. ft. @ 15 mils (38.8 sq. m. @ 380 microns), 310 sq. ft. @ 20 mils (29.0 sq. m. @ 510 microns), 260 sq. ft. @ 24 mils (24.2 sq. m. @ 610 microns).
Appearance: Component A—clear, Component B—clear Shelf Life: 2 years in original unopened container Storage Conditions: 40⁰F-95⁰F (5⁰C-35⁰C) Conditioning: 65⁰F-85⁰F (18⁰C-29⁰C)

MIXING

For optimum performance, all components should be conditioned to between 65°F and 85°F (18°C and 29°C). Premix both Component A (resin) and Component B (hardener) thoroughly before mixing. Place all of Component A and Component B into a suitable container. Component A and Component B are mixed in a 3:1 ratio by volume. Mix Component A and Component B with a slow speed mixer for no more than 3 minutes. Avoid air entrapment. Place mixed material immediately. Mix only that amount of material that can be placed within 35 minutes.

Mix only until all aggregate is wetted out. DO NOT OVER MIX.