FasTrac CE110 INJECTION RESIN
SUPER LOW VISCOSITY EPOXY INJECTION RESIN
FasTrac CE110 Injection Resin is two-component, 100% solids, moisture-insensitive, ultra-low viscosity, high strength, high modulus, multi-purpose liquid epoxy adhesive. It meets the current ASTM C881 and AASHTO M235 Types I, II, IV & V Grade 1, Classes B & C specifications.
Use for pressure-injection of hairline cracks in structural concrete, masonry, wood, etc. Can also be used for delamination injection, wood beam injection, gravity feed of cracks in horizontal concrete and masonry. Useful as an epoxy resin binder for epoxy mortar patching and overlay of interior, horizontal surfaces.
Features
- Structurally restores integrity of concrete
- Ultra low viscosity for deep penetration
- High strength structural adhesive
- Made in America
- Moisture tolerant
- Solvent Free
- Convenient 2:1 mix ratio by volume
- Closes hairline and shrinkage cracks on bridge decks
Viscosity
100 cp
Yield
One gallon (3.8 L) yields 231 cu. un. / 0.0037 cu. m of epoxy
Shelf Life
12 Months
Storage
Below 85 F
Application Temperature Range
Condition material to 65⁰F – 85⁰F (18⁰C – 29⁰C) before using.