CONTACT PHONE 816-380-4747
OPEN HOURS

Mon - Fri 8:00AM - 5:00PM Central

ADDRESS

1150 SE Hamblen Rd, Lee's Summit, MO 64081

FasTrac CE830 NOVOLAC COATING

HIGH CHEMICAL RESISTANT EPOXY NOVOLAC

FasTrac Epoxy Novolac Coating is a two-component, 100% solids, highly chemical resistant epoxy coating for horizontal and vertical applications effective on both steel and concrete. It’s designed for applications where exposure to solvent, strong acids and alkalis, and other aggressive and corrosive chemicals.

Features

  • High chemical resistance
  • Quick return to service—as early as 24 hrs @ 70°F (21°C)
  • Resistance to chipping or cracking
  • Low permeability
  • Low odor
  • Roller, brush, squeegee or spray apply
PACKAGING AND YIELD

FasTracEpoxy Novolac Coating is a two-component system consisting of premeasured containers of resin and hardener. It is available as a 3.9 gallon (14.7 liter) unit yielding coverage of approximately 415 sq. ft. @ 15 mils (38.8 sq. m. @ 380 microns), 310 sq. ft. @ 20 mils (29.0 sq. m. @ 510 microns), 260 sq. ft. @ 24 mils (24.2 sq. m. @ 610 microns).
Appearance: Component A—clear, Component B—clear Shelf Life: 2 years in original unopened container Storage Conditions: 40⁰F-95⁰F (5⁰C-35⁰C) Conditioning: 65⁰F-85⁰F (18⁰C-29⁰C)

MIXING

For optimum performance, all components should be conditioned to between 65°F and 85°F (18°C and 29°C). Premix both Component A (resin) and Component B (hardener) thoroughly before mixing. Place all of Component A and Component B into a suitable container. Component A and Component B are mixed in a 3:1 ratio by volume. Mix Component A and Component B with a slow speed mixer for no more than 3 minutes. Avoid air entrapment. Place mixed material immediately. Mix only that amount of material that can be placed within 35 minutes.

Mix only until all aggregate is wetted out. DO NOT OVER MIX.

Do you have any questions?

If you’ve got questions, we’ve got answers. We take pride in our customer service, and we look forward to your call or email.

Contact Us