CONTACT PHONE 816-380-4747
OPEN HOURS

Mon - Fri 8:00AM - 5:00PM Central

ADDRESS

1150 SE Hamblen Rd, Lee's Summit, MO 64081

FasTrac CE820 EPOXY CHOCK

EPOXY RESIN MACHINE CHOCK

CE820 EPOXY CHOCK is a two-component, 100% solids, high performance epoxy machine grout. It is characterized by high early and ultimate strength, high bearing area, low exothermic, negligible shrinkage and creep, fast cure and excellent flowability. It can also use as anchor adhesive.

 

CE820 EPOXY CHOCK is ideal for high stress applications in such industries like wind turbine, gas transmission, refining, chemical processing, pulp and paper, steel rail, marine and other machine base plate grouting applications in the heavy industrial equipment industries. New equipment installations or quick re-grouting applications subject to chemical attack and extreme vibration are ideal for CE820 EPOXY CHOCK. Can be used for anchoring in large annular areas and an anchoring adhesive.

Limitations

Typical grouting depth is half inch to 2 inches. For pour depths greater than 2 inches contact CCM technical support regarding the use of Aggregate Extender.

Packaging

0.50 cu. ft. kit: 3.75-gal Part A, 1-quart Part B.

Shelf Life

2 years in original unopened containers

Storage

Store at 40F-95F (5C-35C)

Application Temperature Range

Condition material to 65⁰F – 95⁰F (18⁰C – 35⁰C) before using.

Do you have any questions?

If you’ve got questions, we’ve got answers. We take pride in our customer service, and we look forward to your call or email.

Contact Us