FasTrac 246 Concrete

FasTrac 246 Concrete

FasTrac 246 Rapid Setting Concrete being applied with the FasTrac 750 Mixer

Rapid Setting Concrete

FasTrac 246 Concrete is a one-component, shrinkage compensated, proprietary blend of cements, aggregates, and performance enhancing chemical additives. This rapid setting concrete is mixed with water on site, used for large- scale horizontal concrete repairs, and form and pour vertical applications that require high early-strength gain.


  • Very rapid setting; allows structures to be opened to vehicular traffic in 3 hours
  • Non-gypsum based with volume stability
  • Excellent resistance to freeze/thaw
  • Shrinkage compensation minimizes cracking from drying shrinkage
  • Structural repair material
  • Low thermal profile

Where To Use

  • Airport runways
  • Concrete slab replacement
  • Bridge deck repair
  • Parking decks
  • Horizontal concrete surfaces
  • Interior or exterior
  • Dowel Bar Retrofit


Largely dependent upon aggregate proportion; approximately 3 cubic yards per bulk-bag/super-sack and approximately .45 cubic feet per 60-lb bag.


60 lb bags
1,800 lb bulk bags
2,000 lb bulk bags
3,000 lb bulk bags

Shelf Life

12 mos. properly stored


Store and transport in clean, dry conditions.

Application Temperature Range

40° F to 90° F (Hot weather placement procedures recommended above 90°F; Cold weather placement procedures recommended below 50°F)

Project Showcase – See 246 Concrete used in a Slide-In Bridge Construction (SBIC) project, in Columbia, Missouri. Click here!

Exit mobile version